background image

Table of Contents

Models 750, 751, 754, 774, 791, 794

Table of Contents 

 Page 2

Draining Product From The Freezing Cylinder

 29

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Rinsing

 29

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Cleaning

 29

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Disassembly

 30

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Manual Brush Cleaning

 30

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Section 7 

Important: Operator Checklist

 32

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

During Cleaning and Sanitizing

 32

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Troubleshooting Bacterial Count

 32

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Regular Maintenance Checks

 32

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Winter Storage

 33

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Section 8 

Troubleshooting  Guide

 34

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Section 9 

Parts Replacement Schedule

 37

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Section 10 

Limited Warranty on Equipment

 38

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Section 11 

Limited Warranty on Parts

 40

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Note:  Continuing research results in steady improvements; therefore, information
in this manual is subject to change without notice.

Note:  Only instructions originating from the factory or its authorized translation
representative(s) are considered to be the original set of instructions.

E

 2002 Carrier Commercial Refrigeration, Inc. (Original Publication)

(Updated December, 2015)
All rights reserved.
028754

M

Any unauthorized reproduction, disclosure, or distribution of copies by any person of any portion of this work
may be a violation of Copyright Law of the United States of America and other countries, could result in the
awarding of Statutory Damages of up to $250,000 (17 USC 504) for infringement, and may result in further
civil and criminal penalties.  All rights reserved.

Taylor Company

a division of Carrier Commercial Refrigeration, Inc.
750 N. Blackhawk Blvd.
Rockton, IL   61072

Summary of Contents for 750















































Reviews: