background image

Outdoor temperature range transmitted by remote sensor:

Alkaline batteries: -4°F to 140°F (-20°C to 60°C)
Lithium batteries: -40°F to 140°F (-40°C to 60°C)

Resolution: 0.1 degree for temperature
Indoor temperature readings update approximately every 30 seconds
Remote sensor transmits temperature readings every 57 seconds.
Minimum/Maximum temperature records
12/24-hour clock
Transmission: Maximum 200 feet (60 meters) in open area
Power: 2 AAA batteries (not included) for base station and 2 AAA batteries for remote sensor
(not included)

Caution:

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Note:

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation. This
equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.

Party issuing Supplier’s Declaration of Conformity &
Responsible party – U.S. Contact information:
Taylor Precision Products
2311 W. 22nd Street, Suite 200
Oak Brook, IL 60523

Equipment:
Product Name: Wireless Indoor/Outdoor Thermometer & Clock with Remote Sensor
Model No.: 5293168
Trade Name: Taylor, a division of Lifetime Brands, Inc.

Summary of Contents for 1730








Reviews: