Taylor-Dunn G-100 2018 Owner'S Manual Download | Manualshive

Page: 18 / 111

background image

USING ALCOHOL OR DRUGS

Operating this vehicle after consuming alcohol or
drugs could adversely affect operator judgment,
reaction time, balance and perception.
Never consume alcohol or drugs before or while
operating this vehicle.

FAILURE TO INSPECT BEFORE OPERATING

Failure to inspect and verify that the vehicle is in safe operating condition before
operating increases the risk of an accident. Always perform the pre-ride
inspection before each use of your vehicle to make sure it's in safe operating
condition. Always follow the inspection and maintenance procedures and
schedules described in this owner’s manual.

SEAT BELTS

Riding in this vehicle without wearing the seat belt increases the risk of serious
injury in the event of rollover, loss of control, other accident or sudden stop. Seat
belts may reduce the severity of injury in these circumstances.

The operator MUST wear the seat belt at all times.

CARRYING A PASSENGER

The G-100 is a 2-seat vehicle. A passenger must always be seated in the
passenger seat with seat belt secured. Never carry more than two passengers in
a 2-seat vehicle. Carrying a passenger in the cargo box could result in a fall from
the vehicle or contact with moving components. Never carry a passenger in the
cargo box of this vehicle.

OPERATING WITH A LOAD ON THE VEHICLE

The weight of both cargo and operator impacts vehicle operation and stability.
For your safety and the safety of others, carefully consider how your vehicle is
loaded and how to safely operate the vehicle. Follow the instructions in this
manual for loading, tire pressure, gear selection and speed.

•

Do not exceed vehicle weight capacities.

The vehicle’s maximum weight

capacity is listed in the specifications section of this manual and on a label on
the vehicle. When determining the weight you are adding to the vehicle,
include the weight of the operator, accessories, loads in the rack or box and
the load on the trailer tongue. The combined weight of these items must not
exceed the maximum weight capacity.

• The recommended tire pressures are listed in the specifications section of this

manual and on a label on the vehicle.

16

«
...
16
17
18
19
20
...
»

Summary of Contents for G-100 2018
















































































































Reviews:

No comments

Related manuals for G-100 2018

Brand: Go Kart Pages: 20

Brand: Taylor-Dunn Pages: 254

Brand: Kellfri Pages: 16

Brand: MINIMOTO Pages: 33

MINITRANSPORTER MECH 35

Brand: Fort Pages: 64

2012 700 i Cruiser

Brand: Arctic Cat Pages: 708

Brand: NorAM Pages: 613

2015 RZR XP 1000 EPS

Brand: Polaris Pages: 150

Brand: Jacobsen Pages: 60

IBT 4000 Series

Brand: IBEA Pages: 56

Brand: Landoll Pages: 70

Brand: KAYO MOTO Pages: 14

WaveRunner SuperJet 2020

Brand: Yamaha Pages: 84

Brand: Toro Pages: 2

Brand: Hammerhead Pages: 55

Brand: Honda Pages: 167

Brand: Textron Pages: 128

Brand: Toro Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands