background image

Page 17

Huskey C-425 Sevcon DC System Operator Manual 

MC-425-12

Operator Training

Per the following regulations, the owner of this vehicle shall conduct an Operator Training program 
for all those who will be operating this vehicle:

• 

ANSI/ITSDF 56.8-2006 Personnel and Burden Carriers: Part II, Paragraph 6.2a.

• 

ANSI/ITSDF 56.9 – 2007 Safety Standard for Operator Controlled Industrial Tow Tractors: 
Part II, paragraph 4.11.

• 

Code of Federal Regulations (CFR) Title 29, Subtitle B, Chapter Xvii OSHA, Part 1910.178 
Powered Industrial Trucks (2011): 1910.178, Section (l).

• 

Per OSHA Regulation, 29 CFR 1910.178 Powered Industrial Truck Operator Training, the 
owner must keep a record of conducted training and maintenance performed on the vehicle.

 The training program shall not be condensed for those claiming to have previous vehicle operation 
experience. Successful completion of the Operator Training program shall be required for all 
personnel who operate this vehicle. 

The Operator Training program shall include the following:

• 

Operation of this vehicle under circumstances normally associated with your particular 
environment.

• 

Emphasis on the safety of cargo and personnel.

• 

All safety rules contained within this manual.

• 

Proper operation of all vehicle controls.

• 

A vehicle operation and driving test.

Driver Qualifications

Only those who have successfully completed the Operator Training program are authorized to 
drive this vehicle. Operators must possess the visual, auditory, physical, and mental ability to 

safely operate this vehicle as specified in the American National Standards Institute Controlled 

Personnel and Burden Carriers ANSI B56.8.

The following are minimum requirements necessary to qualify as an operator of this vehicle:

• 

Demonstrate a working knowledge of each control.

• 

Understand all safety rules and guidelines as presented in this manual.

• 

Know how to properly load and unload cargo.

• 

Know how to properly park this vehicle.

• 

Recognize an improperly maintained vehicle.

• 

Demonstrate the ability to handle this vehicle in all conditions. 

www.taylor-dunn.com

Summary of Contents for C0-425-48





















































Reviews: