Taylor-Dunn B0-248-36, Service Replacement Parts

Page: 73 / 158

Tires & Wheels
Page 73 MB-248-18
B0-248; B0-254; BT-248; BT-280 (36v & 48v)
TREAD WEAR
ROTATION
Front and rear tires as well as left and right tires can wear at different rates. It is important to periodically rotate your
ties to extend your tire life. Refer to the maintenance schedule in this manual for the recommended interval.
Use the following pattern for a vehicle with no spare tire:
•
Right Rear to Right Front
•
Right Front to Left Rear
•
Left Rear to Left Front
•
Left Front to Right Rear
Use the following pattern for a vehicle with spare tire:
•
Right Rear to Right Front
•
Right Front to Left Rear
•
Left Rear to Spare
•
Spare to Left Front
•
Left Front to Right Rear
It is important to periodically inspect each tires tread for wear.
Driving with inadequate tread increases the risk of loosing
control of the vehicle due to hydroplaning on a wet road
surface. It also increases the risk of a flat tire due to road
debris. Extreme tire wear can result in sudden tire failure and
loss of control of the vehicle.
Refer to the maintenance schedule in this manual for the
recommended interval.
Minimum recommended tread depth is 1/16 inch (1.6
mm). There are a series of tread depth wear indicators
around the circumference of the tire. They will appear as
approximately 1/2 inch (12 mm) bands across the tread as
the tire approaches its wear limit (see illustration). The tire
should be replaced if any tread depth indicator can be seen
or any part of the tread depth is 1/16 inch (1.6 mm) or less.
WARNING
This section is one section of a complete service
manual. Before starting any procedure, read all
warnings and instructions that are located in the
Service Guidelines chapter.
WARNING
DO NOT operate a vehicle if the cord
is visible on any tire (see illustration).
A tire in this conditions may suddenly
fail at any time and cause loss of
control of the vehicle.
WARNING
This section is one section of a complete service
manual. Before starting any procedure, read all
warnings and instructions that are located in the
Service Guidelines chapter.