Taylor-Dunn B0-248-36, Service Replacement Parts

Page: 121 / 158

Replacement Parts
Page 121
* Not available at time of printing
MB-248-18
B0-248; B0-254; BT-248; BT-280 (36v & 48v)
Electrical
Item No. Part No. Description Qty
1 96-624-00 Clamp, 1/4 Jiffy Clip
96-625-00 Clamp, 5/16 Jiffy Clip
2 96-626-00 Clamp, 7/8 Jiffy Clip
3 96-640-00 Clamp, 3/16 Push Mount
4 96-642-00 Wire harness Clip, push mount
5 96-650-01 Wire Harness Clip, stick on
6 96-629-80 (not shown) Clamp, Rubber Lined 3/16 ID
96-630-00 (not shown Clamp, Rubber Lined 5/8 ID
96-630-50 (not shown Clamp, Rubber Lined 5/8 ID (.265 mounting hole)
96-631-00 (not shown Clamp, Rubber Lined 3/4 ID
96-631-10 (shown) Clamp, Rubber Lined 1.0 ID
96-631-15 (not shown Clamp, Rubber Lined 1-1/2 ID
62-033-48 Throttle Module, 24-48 volt system 1
71-122-20 Horn Switch 1
88-065-06 1/4-NC x 21/2 Phillips Truss Head Screw, Horn Switch 2
88-069-81 1/4-NC Hex Nylon Locknut, Horn Switch 2
7 62-033-48 Accelerator Module 1
8 96-650-01 Wire Harness Clip, stick on 0 or 1
9 73-005-05 Reverse Warning alarm 0 or 1
10 71-102-10 Seat interlock Switch 1
11 85-030-00 Spring 2
12 96-773-10 Clevis Pin 2
13 02-610-18 Mounting Plate 1
14 88-527-11 Cotter Pin 2
Not Shown
98-599-15 Plastic grommet for 1.75 hole
98-599-20 Plastic Grommet for 2.5 hole
75-107-10 Portable Charger Harness 1
JF3-86181-00-00 Portable Charger Receptacle 1
78-321-10 Ground Strap (optional) 1
71-111-00 Brake Light Switch 1
88-045-06 10-32 x 1/2 Machine Screw, brake light switch 2
Harnesses
Item No. Part No. Description Qty
75-152-80 Chassie Control Harness, BT 2-80 1
75-152-03 Chassie Control Harness, BT 2-48, B 2-48, B 2-54 1
75-152-13 Control panel harness 1
75-152-81 Power Harness, BT 2-80 1
75-152-11 Power Harness, BT 2-48, B 2-54 1
75-152-02 Power Harness, B 2-48 1
75-148-80 Harness for Pole Mounted Strobe Light 1
75-107-10 Potratble Charger Harness 1
76-013-00 Portable Charger Receptacle 1
75-152-90 Harness, Smart View display 1