Page 58
B-210 / B-200 Curtis DC System Operator Manual
MB-210-14
BRAKE FLUID LEVEL
• Only use DOT 3 brake fluid from a new sealed container.
• DOT 3 brake fluid is corrosive and will damage paint finishes.
• Dispose of brake fluid in accordance with local state and federal regulations.
• Read and follow all warnings provided on the brake fluid container.
• Wear protective gloves when handling brake fluid and thoroughly wash hands after
handling brake fluid.
•
Before removing the master cylinder cap, thoroughly clean the area around the master
cylinder cap. If any contaminates or debris enters the master cylinder then it may
result in diminished and/or loss of braking power resulting in a collision or accident
with severe bodily injury.
WARNING
Periodically visually inspect the brake fluid level in the master cylinder. Low fluid level could result
in diminished and/or loss of braking power.
Depending on the configuration of your vehicle, it may be equipped with one of two types of master
cylinders. See illustrations.
The master cylinder is located underneath the front seats. Thoroughly clean the area around the
master cylinder before removing the master cylinder cap.
Refer to the maintenance schedule in this manual for the recommended inspection interval.
Refer to illustrations for proper brake fluid level
