Taylex ABS5000, Installation Manual

Page: 9 / 13

Page 9 of 13
8. ELECTRICAL CONNECTION

The electrical contractor must follow the electrical specification
supplied with the ABS5000 system

Ensure all electrical works are only completed by licenced persons.

Ensure all electrical work is completed and compliant with AS/ANZ 3000.
Refer to Electrical Specifications on Page 12 & 13
9. COMMISSIONING
Please ensure the following is completed prior to having the system commissioned

Tanks is full of water (5,000lt each)

Effluent Disposal area is installed

Effluent Disposal Area feed line is connected to ABS5000 (Tank 2)

Electrical power is connected (Tank 1 & 2)

Drains connected (main sewer into tank 1 and connection between Tank 1 & 2)
IMPORTANT: The Taylex
®
ABS5000 System cannot be commissioned unless power is
connected to the system.
The ABS5000 will then be switched on (commissioned) by an Employee of Taylex
®
Industries,
a Taylex ® Accredited Distributor (TAD) or a Taylex ® Accredited Service Technician (TASA).