USER INSTRUCTIONS• 5
23
Use lifter
Review and perform relevant inspections. See
Service & maintenance on page 33.
The lifter can be used
in two ways depending on the distance between loads operations.
Option 1 - Using lifter more rarely and with some distance between operations
1. Press the pump switch (b) on the control panel or on the operating handle. The stabilisers under the
lifter are lowered and the articulating arm is released from the safety lock before the pump starts.
2. Move the liftarm so that it can be placed directly over the load. Verify that the lift unit hangs and
moves freely so that unnecessary wear is avoided.
(How to use the operating handle and suction
head is explained on page 24).
3. When the operation is completed, turn off the pump by pressing the pump switch button (b) on the
control panel or by pressing the pump switch button (b) on the operating handle and the
articulating arm will automaticly lock in a safe position. The lifter is now ready to be moved or
switched off.
b
d
e
b
Option 2
- Using lifter often and within smaller distances between operations
1. Press the pump switch (b) on the control panel or on the operating handle. The stabilisers under the
lifter are lowered and the articulating arm is released from the safety lock before the pump starts.
2. Same as in option 1.
(How to use the operating handle and suction head is explained on page 24).
3. When the operation is completed, press the transport mode button (d) on the control panel. When
the stabilisers under the lifter are pressed in the lift pump will automatically be turned off and the
articulating arm will automaticly lock in a safe position. The lifter is now ready to be moved, See
Move lifter on page 21
.
4. When the lifter is moved, press the park mode button (e) on the control panel and the stabilisers
under the lifter will be lowered and the lift pump will automatically be turned on again. With this
function there is no need to turn off the entire lifter between every operation, which makes it more
effective.