Taurus Z9PRO, Assembly And Operating Instructions Manual

Page: 19 / 48

Z9PRO
19
• Get off the indoor cycle to adjust the height and loosen the setting lever of the seatpost.
Then slide the seatpost up or down as required.
• If the saddle is in the desired position, place the clamp lever back into the locked position
in order to secure the seatpost.
• Do not make any adjustments beyond the stop markings.
Horizontal adjustment
• Sit on the indoor cycle and rotate the pedal cranks into the 3 and 9 o’clock position. If the
knee from your leg facing forward is directly above the axle of the pedal, the horizontal
setting of the seat is correct.
• Otherwise get off the bicycle in order to adjust the longitudinal direction backwards or
forward as required. To do this, loosen the setting lever on the saddle and slide the seat
forward or backwards as desired.
Then pull the lever tight again.
• Do not make any adjustments beyond the stop markings.
CAUTION
• Due to safety reasons, do not pedal backwards while brake resistance is set.
• The machine is NOT equipped with a free-run system. That means: If you move
the flywheel, the pedals move as well. In order to avoid knee injuries, do not
try to stop the equipment by pedaling backwards. Also do not try to take your
feet from the rotating pedals. The motion can only be stopped by pressing the
emergency brake or through a controlled reduction of the pedal rate.