- 11 -
3
Gas electric outlet:
Connect gas electric plug of the TIG welding torch.
4
Terminal socket - negative pole (-):
Connect TIG welding torch. In MMA
mode, connect electrode holder cable set in direct current electrode negative
way, connect earth clamp cable set in direct current electrode positive way.
5
Remote control line socket:
Connects to the remote control box or to the
remote pedal switch.
6
Terminal socket - positive pole (+):
In DC TIG mode, connect earth clamp
cable set. In MMA mode, connect earth clamp cable set in direct current
electrode negative way, connect electrode holder cable set in direct current
electrode positive way.
13
Digital diode display:
Displays function values and real-time current output.
14
Welding parameter adjustments and selections :
Rotate to adjust the
parameter values.
15
Parameter selection push button:
In TIG mode selections can be made
from the following:
pre-flow, start amps, upslope, peak amps, duty cycle,
pulse frequency, base amps, downslope
and
post-flow.
When the
corresponding light is lit, the selected item can be adjusted to the required
value.
16
Parameter light:
The corresponding parameter is adjustable when the light
is lit.
17
Welding process push button:
Select between
TIG
and
MMA
and the
machine is operable when the corresponding indicator light is lit.
18
2T/4T:
Press the button to select between 2T (continuous arc) and 4T (arc
stopping) and the corresponding light indicates the selected mode.
19
Pulse:
Pressing this button allows selection between
pulse
and
non-pulse
welding. The selected mode is active when the corresponding light is lit.
20
AC frequency / AC clean width:
While in AC TIG welding mode, press the
button to select between
AC frequency
and
AC clean width
. The
corresponding light indicates the selected mode.
