Taurus TF-X7.1, Assembly And Operating Instructions Manual

Page: 28 / 40

X7.1
28
5.3 Maintenance and Inspection Calendar
To avoid damage from body sweat, the equipment must be cleaned with a damp towel (no solvents!)
after each training session.
The following routine tasks must be performed at the specified intervals:
Part Weekly Monthly Quarterly
Display console C I
Slide rails C
Lubrication of slide rails and moving parts I
Plastic covers C I
Screws and cable connections I
Legend: C = clean; I = inspect
6 DISPOSAL
At the end of its operational life, this equipment cannot be disposed of in normal household waste.
Instead, it must be disposed of via an electricals recycling centre. Further information can be
obtained from your local authority‘s recycling service.
The materials can be recycled as per their symbols. Through the reuse, recycling
of materials or other forms of recovery of old equipment, you make an important
contribution to the protection of the environment.
No pulse display
+ Sources of interference in
the room
+ unsuitable chest strap
+ Wrong position of chest
strap
+ Chest strap defective or
battery empty
+ Pulse display defective
+ Eliminate sources of interference (e.g.
mobile phone, WLAN, lawn mower
and vacuum cleaner robot, etc. ...)
+ Use a suitable chest strap (see
RECOMMENDED ACCESSORIES).
+ Reposition chest strap and/or
moisten electrodes
+ Changing batteries
+ Check if pulse display by hand pulse
possible