Taurus TF-WS7-ATT, Assembly And Operating Instructions Manual

Page: 47 / 80

ground frame
20 washer Φ12 14
21 lock nut M12 6
125 leg press main frame 1
126 leg press front
connection tube 1
127 leg press back
connection tube 1
128 connection plate 1
129 arc-shaped
connection plate 2
130 spring washer Φ12 2
131 hexagon bolt M12*30 2
132 hexagon bolt M12*80 2
133 hexagon bolt M12*125 4
47
2.7 Assembly Leg Press
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1
1. Fit the front connecting tube (126) to the
main frame with M12*30 bolts (131), Ф12
spring washers (130) and Ф12 washers (20).
2. Fit the rear connecting tube (127) to the
main frame using the M12*80 bolts (132),
Ф12 washers (20), M12 lock nuts (21) and the
connecting plate (128).
3. Fit the side main frame (125) to the front and
rear connecting tubes with M12*125 bolts
(133), Ф12 washers (20), M12 lock nuts (21)
and connecting plates (128).