Taurus TF-UB10.5, Assembly And Operating Instructions Manual

Page: 19 / 48

UB10.5 Pro
19
Step 6: Alignment of the feet
If the floor is uneven, you can stabilize the equipment by turning the two setting screws under the
main frame.
1. Lift the equipment on the desired side and rotate
the setting screws under the main frame.
2. Rotate the screws clockwise in order to remove
them and to raise the equipment.
3. Rotate them counterclockwise in order to lower the
equipment.
Step 7: Connecting the equipment to the mains supply
L
NOTICE
The equipment can be used without an adapter and is equipped with a 12V rechargeable
battery. The battery charges when pedalling constantly at more than 35 RPM (revolutions per
minute). An optional adapter (18V, 1000mA) can be used as a charging aid.
Plug the power plug into a wall outlet that complies with the instructions in the chapter on electrical
safety.