Taurus TF-ROW-X, Assembly And Operating Instructions Manual, Page: 8 / 40

ROW X
8
1.4 Set-up place
+ The equipment should only be used indoors, in a sufficiently heated and dry area (ambient
temperature between 10°C and 35°C). The equipment should not be used outdoors or in rooms
with high humidity (over 70%) like swimming pools. The equipment should only be stored in
surroundings with an ambient temperature between 5°C and 45°C.
+ The training room should be well ventilated during training and not be exposed to any
draughts.
+ Always keep the power cable away from hot surfaces and grounds and make sure that the
cable is not stuck somewhere or becomes a „trip hazard“.
+ No objects of any type should be inserted into the openings of the equipment.
+ The equipment should be placed on a level and solid surface, any unevenness in the floor
should be leveled out.
+ A floor protective mat / equipment underlay can help to protect high-quality floor coverings
(parquet, laminate, cork, carpets) from dents and sweat and can help to level out slight
unevenness.
+ Choose a location in which to place the equipment such that there is enough free space/
clearance to the front, the rear and to the sides of the equipment. Make sure that you leave
at least 30 cm on each side of the equipment and at least 15 cm in front of and behind the
equipment as a training zone. This is the minimum required area in order to safely use the
equipment.
The recommended free zone around the equipment should be at least 60 cm on each side and
45 cm in front of and behind the equipment.
Furthermore, the equipment should not be set up in main entrances or on escape routes.
Training zone
Recommended free zone