1
Barbell rack
2
2
Long barbell pipe
Φ38*3*414
4
4
Protecting jacket
Φ46*Φ38*212
4
5
Protecting jacket
Φ46*Φ38*114
4
6
Barbell bushing
Φ76*Φ45.5*35
8
7
Pipe plug
Φ46*20
8
8
Hexagon socket button head screw
M6*25
8
10
Hexagon socket set screws with flat point M6*6
8
11
Large washer
Φ18*Φ6.4*1.6
8
13
Spring washer
M6
8
4
2
1
Flat bench
15
Step 2:
Assembly of Barbell Pipes and Protecting Jackets
1. Push the protecting jacket (4) onto the long barbell pipe (2).
2. Insert the long barbell pipe (2) through the barbell bushing (6) into the upper hole of the barbell
rack (1).
3. Attach the pipe plug (7) at the end of the protecting jacket (4) by using one screw (8), one spring
washer (13) and one large washer (11).
4. Insert the protecting jacket
(5) through the barbell
bushing (6) on the other side
into the upper hole of the
barbell rack (1).
5. Attach the pipe plug (7) at the
end of the protecting jacket
(5) by using one screw (8),
one spring washer (13) and
one large washer (11).
6. Fasten both barbell bushings
(6) by using two screws (10).
7. Repeat these steps for the
lower hole of the barbell rack
(1).
8. Repeat step 1 to 7 on the
other barbell rack (1).
9. Now tighten all screws.
No.
Name
Specification
Qty.
Summary of Contents for TF-PTT0209
Page 2: ...2 Flat Bench ...
Page 21: ...Exploded View 8 21 7 3 Exploded Drawing Flat Bench ...
Page 23: ...23 7 5 Exploded Drawing Barbell Rack ...
Page 28: ...Taurus Studio Flat Bench ...