- 6 -
EXTERNAL DEVICES CONNECTION
External devices such as a preamp or a guitar DSP can be connected to the Stomp Head.
Both devices may be set-up by two different method.
1. To the amp input – in this configuration all potentiometers and foot-switches will be active.
2. Directly to the power amp, by-passing the pre-amp. In this configuration, the OUTPUT of
DSP or external PRE-AMP must be connected to the effect loop RETURN. Consequently,
the Stomp- Head’s pre-amp stays disconnected and only the BOOST foot-switch remains
active. This set-up is recommended when only the Stomp Head's power amp is needed.
PREAMP
You can choose between two
modes NORMAL and MIX.
In NORMAL mode only chosen
channel will work. In MIX mode
two channels will work.
Made in Poland
Fuse: 2.5A
NUMBER:
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS PRODUCTS
TO RAIN OR MOISTURE
WARNING!
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER.REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL
CAUTION!
SEND
EFF
LOOP
(PA-INPUT)
Two mode output:
NORMAL
SPEAKER SIMULATION
SELECTABLE POWER OUTPUT:
90W/40W [RMS]
POWER
RETURN
4-8-16
ohm
GAIN
EXT. CTRL.
MIX MODE
NORMAL
Ch-1
Ch-2
Ch-3
BOOST
LINE OUT
200W/rms power stage
INSIDE
230V/50Hz
Fuse: 2.5A
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS PRODUCTS
TO RAIN OR MOISTURE
WARNING!
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER.REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL
CAUTION!
NORMAL
MIX. MODE
(PA-INPUT)
SPEAKERS
4-8-16ohm
SEND
RETURN
IN. GAIN
POWER
Stage
Studio
EFX
Made in EU
SERIAL NO:
SELECTABLE POWER OUTPUT:
STAGE: 60W/25W (RMS)
STUDIO: 15W/7W (RMS)
LINE
OUT has two outputs. One with cab
simulation and one without. You
can use any of those outputs or
you can use them both at the same
time.
Configuration-2
Configuration-1
