Taurus RX7 Assembly And Operating Instructions Manual Download Page 13

Page: 13 / 68

367

373

013

373

367

SAFETY STRAP

HOLDER

002

RX7

2.3

Assembly

Before assembly, take a close look at the individual assembly steps shown and carry out the assembly

in the order given.

NOTICE

First loosely screw all parts together and check that they fit properly. Then tighten the screws

using the tool only when you are instructed to do so.

ड

ATTENTION

Before unpacking the RX7 rowing machine, make sure that you have a free space of 2 x 2.5

metres for assembly.

Step 1:

Unpacking

Open the packaging, see illustration

below.

NOTICE

Do not remove the protective

packaging material before it‘s

absolutely necessary.

Step 2:

Preparing the assembly

1. Take the partially assembled

rowing machine out of the box and

set it up, see illustration below.

2. Remove and dispose of the safety

strap holders. Put the rowing

handle in the given support.

3. Remove two screws (

367

) from

the main frame (

) and two screws

(

373

) with the provided tools.

4. Mount the footrests (

013

) with

both screws (

367

) and (

373

Tighten the screws.

Summary of Contents for RX7





































































Search results

Summary of Contents for RX7

Reviews:

Related manuals for RX7

Brands by name

Popular brands

Taurus RX7, Assembly And Operating Instructions Manual

Search results

Summary of Contents for RX7

Reviews:

Related manuals for RX7

Brands by name

Popular brands