Taurus RB9.9, Assembly And Operating Instructions Manual

Page: 37 / 52

RB9.9
37
5.3 Error codes and troubleshooting
The electronics of the crosstrainer are continually running tests. In case of deviations, an error code is
shown on the display and normal operation is stopped for your safety.
+ E-1 No values were received during the body fat analysis. Make sure that, during the analysis,
you hold on to the hand pulse sensors with both hands.
+ E-4 The user settings entered for age, height, weight or the body fat ratio is outside of the
setting range.
5.4 Maintenance and Inspection Calendar
To avoid damage from body sweat, the equipment must be cleaned with a damp towel (no solvents!)
after each training session.
The following routine tasks must be performed at the specified intervals:
Part Weekly Monthly Quarterly Half-yearly Yearly
Display console C I
Lubrication of moving
parts
I
Plastic covers C I
Screws and cable
connections
I
Legend: C = clean; I = inspect
6 DISPOSAL
At the end of its operational life, this equipment cannot be disposed of in normal
household waste. Instead, it must be disposed of via an electricals recycling centre.
Further information can be obtained from your local authority‘s recycling service.
The materials can be recycled as per their symbols. Through the reuse, recycling
of materials or other forms of recovery of old equipment, you make an important
contribution to the protection of the environment.