Taurus NIXUS, Instruction Manual

Page: 25 / 116

STEP 3 – SIDE OF HEAD:
-Attach the longest comb guide size 9 / 12 / 15 / 18 mm again and
continue until you reach the top of the head.
STEP 4 – TOP OF HEAD:
-Using comb guide size adjusted to desired height, pass the
appliance from the back to the front, against the growth of the hair
(Fig.5). In some cases it’s necessary to go over what you have
done a second time from front to back.
-The comb guide size 3 / 6 mm is for when you want to achieve a
more precise cut.
-Use comb guides size 9 / 12 /15 /18 mm to leave hair at a longer
length. Hold the hair up with the comb or the comb and your
fingers and cut.
-Always work form back to the front reducing the length between
your fingers or the comb and the head gradually.
STEP 5 – FINAL TOUCH:
-Finally use the appliance without attaching any comb guides to the
blades to cut the hair around the base of the neck, the sides of the
neck and the ears.
-To make sideburns straight, turn the appliance over to use the
upper blades (Fig. 6). Move the appliance adapting it the physiog-
nomy of the head. To achieve more precise results use a shaver.
ONCE YOU HAVE FINISHED USING THE APPLIANCE:
-Turn the appliance off using the on/off button.
-Unplug the appliance from the mains.
-Put on the protective cover.
CLEANING:
-Disconnect the battery charger from the mains and allow it to cool
before undertaking any cleaning task.
-Clean the equipment with a damp cloth with a few drops of wash-
ing-up liquid and then dry.