Taurus NIXUS, Instruction Manual

Page: 26 / 116

-Do not use solvents, or products with an acid or base pH such as
bleach, or abrasive products, for cleaning the appliance.
-Never submerge the appliance in water or any other liquid or place
it under running water.
-During the cleaning process, take special care with the blades, as
they are very sharp.
-If the appliance is not in good condition of cleanliness, its surface
may degrade and inexorably affect the duration of the appliance’s
useful life and could become unsafe to us.
-Clean the blades and the comb guide with the cleaning brush.
Remove the hairs from the blades and from inside the appliance
with the brush. It is important to clean off remaining hairs after each
use.
-To clean the blades press button G, proceed to clean them using
the brush. For a deeper cleaning, press the inner pivoting blade.
(Fig.7)
-It is important to clean the hair after each use.
-Do not immerse the blades under the water
-Once the appliance has been cleaned, add a drop of lubricating oil
to the blades and keep the appliance on for a few seconds.
ANOMALIES AND REPAIR:
-Take the appliance to an authorised technical support service
if product is damaged or other problems arise. Do not attempt
to disassemble or repair the appliance yourself as this may be
dangerous.
FOR EU PRODUCT VERSIONS AND/OR IN CASE THAT IT IS
REQUESTED IN YOUR COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE PRODUCT
-The materials of which the packaging of this appliance consists are
included in a collection, classification and recycling system. Should
you wish to dispose of them, use the appropriate public recycling
bins for each type of material.