Taurus Multi-gym UltraForce, Assembly And Operating Instruction

Page: 28 / 54

28
Ultra Force
Required parts for step 9:
Step 9: Assembly pulleys
1. Determine the positions of the individual pulley holders, see markings.
2. Take the two pulleys without the UltraForce logo and the two pulley brackets, which are
designated for the lower end of the main frame. Mount the pulleys on the lower backside of the
main frame with two Allen screws and two cap nuts. Do not tighten the screws yet!
3. Take the two pulley brackets for the upper end of the main frame and the two pulleys with
UltraForce logos. Mount these parts on the upper main frame with two Allen screws and two
cap nuts. The logos are facing each other.
4. Take the two pulley brackets for the swivel arms and the two pulleys with UltraForce logos.
Mount these parts on the end of the swivel arms with two Allen screws and two cap nuts. The
logos point forward.
Notes for steps 9-2 to 9-4:
- All nuts and screws are brought in from
the front to back - with the nut on the
backside.
– Make sure that the bracket pins are
properly anchored.
– The nuts must first be tightened slightly
in order to attach the rope.