background image

33

 WORKOUT INSTRUCTIONS

The Taurus UltraForce is a multi-functional multi-gym for achieving many training targets. Muscle 

toning and tightening are possible as well as an improvement of strength-endurance and an effective 

support in losing weight. We have compiled some important training tips for you so you can achieve 

your training targets as effectively, safely and lastingly as possible.

4.1 

General training instructions 

 

ATTENTION

 

+

Please read through this section before you begin training.

 

ATTENTION

 

+

If you are older than 35 years and have not trained for several years, consult your physician 

and they will recommend an assessment test. Your physician can support you in determining 

the target heart rate zone corresponding to your age and fitness level as well.

You should also consult your physician in the event of:

- High blood pressure

- High cholesterol values

– Asthma

– Heart problems

- (Death through) strokes or heart attacks in your family history

- Frequent cases of dizziness

- Extreme breathing problems after slight strain

- Arthritis or other bone problems

- Serious muscle/ligament/or tendon problems

- Other known or presumed illnesses

- If you feel pain or tension in the breast, feel an irregular heart beat or are short of breath, stop 

training immediately. Consult your physician before you continue.

- Pregnancy

- Balance impairments
- Taking medicine that affects your heart rate.

Warm-up

We recommend starting every training session by warming up in order to prevent injuries and to 

maximize performance. Your warm-up phase prepares your muscles softly for the load. Begin with 

five to 10 minutes of soft exercises (e. g., walking) that gradually increase your heart rate and loosen 

up your muscles. The warm-up phase should be aerobic and require a slight, unconstrained range 

of movement. This should be followed by five to 10 minutes of stretching (see page 38 in these 

instructions or in the included training instructions). Never bring your body beyond the point of soft 

tension or strain. Make sure to have soft, rhythmic, controlled movements.

Summary of Contents for Multi-gym Ultra Force TF-UF-PRO























































Reviews: