Taurus MO20IXD, Manual, Page: 8 / 40

Installation Instructions
Please Read the Manual Carefully Before
Installation
The microwave includes 3 accessories that
must be fixed before installation:
A - Footpad block
B - Rubber mat
C - Bracket
Follow the instructions below for the
assembly.
Accessories for installation:
1. Adjusting screw A
2. Screw B
3. Trim-kit plastic cover
Electrical connection
The oven is fitted with a plug and must be only
connected to a properly installed earthed socket.
In accordance with the appropriate regulations,
the socket must only be installed and the
connecting cable must only be replaced by a
qualified electrician.
If the plug is no longer accessible following
installation and all-pole isolating switch must be
present on the installation side with a contact
gap of at least 3mm.
Built-in furniture
- The built-in cabinet shall not have a rear wall
behind the appliance. Minimum installation
height is 85cm.
- Do not cover ventilation slots and air intake
points.
1.