- 28 -
2.
Welding Process When Welding Aluminium
Steps
Content
Description
1
Securely connect the welding torch and
earth cable set to the machine.
2
Ensure the earth clamp is connected near
the welding zone.
3
Select the suitable spool of wire and mount it
over the feeder hub as explained in clause
5.1.
4
Check the brake force tension is sufficient as
explained in clause 5.2.
5
Select the suitable drive roll and tensioner
rollers as explained in clause 6.2. Adjust the
pressure as explained in clause 6.3.
6
Allow approximately 10 to 15mm wire
outside the contact tip and cut the excess
