NOTE: If the battery is about to run out, the robot
will return to the charging base automatically to
recharge.
NOTE: If the load base is inaccessible, the robot
can not be recharged, it will return to the initial
situation and the cleaning system will end. In this
case, place the robot manually in the charging
base so that it can be recharged correctly.
PAUSE THE ROBOT
-To stop the robot press the operation button (D)
or press the on / off button (AL) on the remote
control.
-To resume the cleaning cycle, press the opera-
tion button (D) again.
-For the robot to return to the charging base (U)
press the Go Home button (AJ).
POWER OFF THE ROBOT
-To turn off the robot press the operation button
(D) next until the operation indicator goes off.
CLEANING MODES
AUTO CLEANING MODE
-The robot starts to vacuum automatically and
combines the different cleaning modes in one
optimizing the cleaning of your home to the
maximum. To use the AUTO cleaning mode,
press the button (AI) on the remote control.
-When the cleaning cycle ends or if the battery
runs out, it returns to the charging base auto-
matically.
SPIRAL CLEANING MODE
-The robot starts vacuum at a particular point
by spiraling outward approximately (1 meter) in
diameter and then spiraling inward to where it
started. To use the spiral cleaning mode, press
the (AI) button on the remote control.
MAX CLEANING MODE
-The robot increases its suction power to provi-
de a deeper cleaning.
-To use the MAX cleaning mode, press the (AR)
button on the remote control.
-MAX cleaning mode can only be activated
during operation in AUTO cleaning mode.
Downloaded by: pm-capetown on 19-09-2022 12:35 CEST
