Taurus FS10.5 Pro, Assembly And Operating Instructions Manual

Page: 35 / 52

FS10.5 Pro
35
5 TROUBLESHOOTING, CARE AND MAINTENANCE
5.1 General Instructions
⚠
WARNING
+ Do not make any improper changes to the equipment.
⚠ CAUTION
+ Damaged or worn components may affect your safety and the life of the equipment.
Therefore, immediately replace damaged or worn components. In such a case, contact the
contract partner. The equipment must not be used until it has been repaired. If necessary,
use only original spare parts.
࣑ ATTENTION
+ In addition to the instructions and recommendations for maintenance and care given here,
additional service and/or repair work may be necessary; this must only be carried out by
authorised service technicians.
5.2 Faults and Fault Diagnosis
The equipment undergoes regular quality controls during production. Nevertheless, faults or
malfunctions may occur. Frequently, individual parts are responsible for these disturbances, an
exchange is usually sufficient. Please refer to the following overview for the most common errors and
how to correct them. If the equipment still does not function properly, contact your contract partner.
Fault Cause Solution
Drive discs wobble or
make noises
Drive pulley is loose Tighten nuts
Display does not work No plug connection, power
supply not plugged in
Check all plug connections and see if the
power supply is plugged in
Footplates are
creaking
Footplates are loose Tighten up the footplate screws
Creaking noises Screws are loose Check screws are properly tightened
No pulse reading
+ Sources of interference in
the room
+ Unsuitable chest strap
+ Chest strap is incorrectly
positioned
+ Batteries are empty oder
discharged
+ Eliminate sources of interference
(e. g. mobile phone, loudspeaker,
WLAN, mover- and cleaning robot
etc.)
+ Use a suitable chest strap (see
recommended accessories)
+ Reposition the chest strap and/or
moisten the electrodes
+ Change or charge the batteries