36
RB10.5
5
TROUBLESHOOTING, CARE AND MAINTENANCE
5.1
General Instructions
⚠
WARNING
+
Do not make any improper changes to the equipment.
⚠
CAUTION
+
Damaged or worn components may affect your safety and the life of the equipment.
Therefore, immediately replace damaged or worn components. In such a case, contact the
contract partner. The equipment must not be used until it has been repaired. If necessary,
use only original spare parts.
࣑
ATTENTION
+
In addition to the instructions and recommendations for maintenance and care given here,
additional service and/or repair work may be necessary; this must only be carried out by
authorised service technicians.
5.2
Faults and Fault Diagnosis
The equipment undergoes regular quality controls during production. Nevertheless, faults or
malfunctions may occur. Frequently, individual parts are responsible for these disturbances, an
exchange is usually sufficient. Please refer to the following overview for the most common errors and
how to correct them. If the equipment still does not function properly, contact your contract partner.
Fault
Cause
Solution
Pedals are squeaking
Pedals are loose
Tighten the screws in the pedals
Equipment wobbles
Equipment is not level
Align feet
Handlebar/saddle
wobbles
Screws are loose
Re-tighten the screws
Display doesn’t
function
Cables not properly
connected
Check all cable connections
No pulse displayed
+
Source of interference in
the room
+
Chest strap is not
compatible
+
Position of the chest
strap is incorrect
+
Batteries are empty
+
Eliminate the source of interference
(e.g. Mobile, Speakers, etc.)
+
Use a compatible chest strap (see
recommended accessories)
+
Re-position the chest strap and/or
moisten the electrode(s)
+
Change the batteries
