14
Dual Pulley
Step 3:
Assembly of Weight Stack Plates
1. Place two rod end covers (34) in the bottom of the right doorframe (2).
2. Insert the guide rods (10) into the two rod end covers (34).
3. Slide the two rubber bumpers (38) onto the guide rods (10).
L
NOTICE
Make sure that the holes in the weight stack plates are facing inwards. Begin with the weight
plate with the highest number.
4. Carefully slide 19 weight stack plates (21) over the guide rods (10) one by one.
5. Carefully slide the counterweight (22) with the shaft (23) over the guide rods (10).
6. Attach the parsing davit (7) to the upper thread of the shaft (23).
7. Attach the guide rods (10) along with two rod end covers (34) to the guide rod fixing plate (11).
8. Attach the guide rod
fixing plate (11) to the
upper side of the right
doorframe (2) by using
two screws (47), two
spring washers (58) and
two plain washers (55).
9. Insert the selector pin
(24) into any desired
hole of the shaft (23).
10. Repeat the steps 1 to 9
for the left doorframe
(1).
Summary of Contents for Elite SEBR7017
