Taurus Elite SEBR7017, Assembly And Operating Instructions Manual

Page: 12 / 32

12
Dual Pulley
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1: Assembly of the Joint Frames
1. Attach the upper joint frame (4) to the left and right doorframes (1&2) by using four screws (46),
four spring washers (57) and four plain washers (54) on each side.
2. Attach the lower joint frame (4) to the left and right doorframes (1&2) by using four screws
(46), four spring washers (57) and four
plain washers
(54) on each
side.