AFTER SALES SUPPORT
1300 922 271
MODEL NUMBER: E-MG 250E,
10/11
8
m
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the machine is used
in commercial, trade or industrial businesses or for
equivalent purposes.
5. Technical data
Mains voltage:
240 V~ 50Hz
Power input:
250 W
Idling Speed:
15000 - 21000 rpm
Sanding/grinding:
90 x 90 x 90 mm
Oscillation angle:
3º
Protection Class:
II/
Weight :
1.35 kg
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L
pA
sound pressure level
87 dB(A)
K
pA
uncertainty
3 dB
L
WA
sound power level
98 dB(A)
K
WA
uncertainty
3 dB
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
Handle
Vibration emission value a
h
= 4.632 m/s²
K uncertainty = 1.5 m/s
2
Warning!
The specified vibration value was established in
accordance with a standardized testing method. It may
change according to how the electric equipment is
used and may exceed the specified value in exceptional
circumstances.
The specified vibration value can be used to compare
the equipment with other electric power tools.
The specified vibration value can be used for initial
assessment of a harmful effect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect working
•
order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever necessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves
Residual risks.
Even if you use this power tool in accordance with
instructions, certain residual risks cannot be ruled
out. The following hazards may arise in connection
with the equipment’s construction and layout:
1.
Lung damage if no suitable protective dust mask
is used.
2.
Damage to hearing if no suitable ear protection is
used.
3.
Health damage caused by hand-arm vibrations if
the equipment is used over a prolonged period or
is not properly guided and maintained.
6. Before starting the machine
•
Before you connect the equipment to the mains
supply make sure that the data on the rating plate
is identical to the mains data.
•
Always pull the power plug before making
adjustments to the equipment.
6.1 Choosing the right plug-in accessories
Saw Blade (Fig. 1/Item 6) and HSS saw blade (Fig. 1/
Item 10):
Sawing wood and plastic.
Notes on working practice: When sawing, watch out
for foreign bodies in the workpiece and remove these if
necessary.
The saw blade (Fig. 1/Item 6) can be used for plunge
cutting.
Important!
Plunge cutting is allowed only in soft
materials such as wood or plasterboard.
Diamond saw blade (Fig 1/Item 9):
For partial repair of
tiled surfaces indoors and brick walls. Notes on working
practices: Only to be used when the turning frequency
is high.
Triangular sanding/grinding plate (Fig 1/Item 8):
Surface sanding/grinding at edges, in corners or hard-
to-reach areas. Depending on choice of sanding/grinding
paper for the sanding/grinding of wood, paint, lacquer,
etc.
The Velcro fastener enables easy changing of sanding/
grinding paper. Make sure that the vacuum extraction
holes on the sanding/grinding paper and the triangular
sanding/grinding plate (Fig. 1/Item 8) are aligned.
Notes on working practice: This equipment offers
particularly high performance for the sanding/grinding of
hard-to-reach corners and edges. To sand/grind profiles
and channels you can also work with just the tip or the
