10
DMX address:
After select the Address and press Enter , use Up and Down button to select
the desired DMX address,press Enter to save new setting.
DMX modes:
After select the Channel and press Enter , use Up and Down button to select
the desired DMX channel mode, press Enter to save new setting.
Manual Mode:
After select the Manual" and press Enter , use Up and Down button to select the
block intensity from 000 to 255.Then select strobe speed from 000 to 255, press Enter" to save
new setting.
Auto Mode:
This fixture has 18 built-in programs. Entered "Auto" mode, use Up and Down button to
select the built-in program,"Auto 1 ~ Auto 18", then press the "Enter" to confirm. Use Up
and Down button to select the operating speed of the program from 000 to 255, press
Enter" to save new setting.
Effect on Auto:
Use Effect on Auto to switch on dimmer and strobe function to auto mode. Entered Effect
on Auto mode, use Up and Down button to select dimmer level, then press the
"Enter" to confirm. Use Up and Down button to select strobe speed from 000 to 255,
press Enter" to save new setting.
Controlling:
After having addressed the Cyclone 1320,you may now start operating it via your lighting
controlled,please be sure that you don't have any overlapping channels in order to control each
fixture correctly and independently from any other fixture on the DMX-chain,if several fixtures
are addressed similarly,they will work synchronically.
Please see the following DMX protocol graphic for the respective channel values.
Note:
After switching on,the device will automatically detect whether DMX 512 data is received or not,if there is data received at
the DMX-input,a * on the display will not blink,if there is no data received,the * will blink on display.
