For dry-vacuuming, slip the pleated
(Fig.
3/24) over the
basket (Fig. 2/20). The
pleated
(24) is suitable for dry-vacuuming
only.
5.3 Fitting the suction hose (Fig. 1/9)
Connect the suction hose (9) to the
corresponding connector on the wet and dry
vacuum cleaner, depending on the application
required.
Vacuuming
Connect the suction hose (9) to the suction hose
connector (8).
Blowing
Connect the suction hose (9) to the blow
connector (19).
To extend the suction hose (9) you can attach
one or more of the elements which make up the
2-part suction tube (17) to the suction hose (9).
Air regulator (Fig. 1/13)
The air regulator (13) can be
between the
suction hose (9) and the suction tube (17). The
suction power of the nozzle can be
adjusted using the air regulator (13).
5.4 Suction nozzles
Combination nozzle (Fig. 1/14)
For dry vacuuming surfaces use the dual-purpose
nozzle (14).
Crevice nozzle (Fig. 1/23)
The crevice nozzle (23) is designed for
vacuuming solids and liquids in corners, edges
and other areas that are
to access.
6. Operation
6.1.1 ON/OFF switch (Fig. 2/15)
Switch position 0: Off
Switch position I: On
6.1.2 Automatic switch (Fig. 2/16)
Switch position _ : Normal mode
Switch position = : Automatic mode
6.2. Dry vacuuming
Use the pleated
(24) for dry vacuuming (see
point 5.2).
Always ensure that the
are perfectly
secure.
6.3 Wet vacuuming
For wet-vacuuming, use the foam
(25) (see
point 5.2).
Check that the
is securely
at all times.
4. Technical data
Mains voltage:
240 V ~ 50Hz
Power input:
1,000 watts
Max. power consumption of the
automatic socketoutlet:
1,400 watts
Max. total power consumption:
2,400 watts
Container volume:
30 L
Weight:
10 kg
5. Before starting
Important!
•
Before you connect the appliance to the
mains supply make sure that the data on the
rating plate are identical to the mains data.
•
The appliance may only be connected to a
shockproof socket.
5.1 Assembling the appliance
5.1 Appliance assembly
Fitting the castors (Fig. 6/12)
Fit the castors (12) into the appropriate
mountings on the underside of the tank (10).
Push the castors (12)
into the mounting
until they engage with a clicking noise (Fig. 6).
Fitting the appliance head (Fig. 5)
The appliance head (5) is fastened to the
container (10) by the locking hook (18). To
remove the appliance head (5), open the locking
hook (18) and remove the appliance head (5).
When
the appliance head (5), make
sure that the locking hook (18) locks into place
correctly.
Important!
Never use the wet and dry vacuum cleaner
without a
Check that the
is securely
at all times.
Important!
Remove the pleated
before you
the foam
For wet vacuuming, slip the supplied foam
(25) over the
basket (Fig. 2/20). The
pleated
(24) already
upon delivery is
not suitable for wet vacuuming.
7
After Sales Support
EMAIL: [email protected]
TEL: 1300 922 271
