CORDLESS
RECIPROCATING SAW
BT-AP 18 Li
QUICK START
GUIDE
Easy steps to getting started.
1. Carefully remove all items from the packaging, take care that you have all parts supplied in the
packaging before discarding.
2. To mount the battery pack (3) , push the battery pack (3) onto the equipment until it latches in place.
3. To remove the battery pack (3), press the pushlock button (7) to remove the battery pack (3) from the equipment.
4. To charge the battery pack (3), follow the instruction on page 1 of the Quick Start Guide.
5. To switch on the saw, press the locking button (2) and the ON/OFF switch (1) at the same time. Note: Allow the
saw blade (4) to accelerate until it reaches full speed. Then slowly move the saw blade along the cutting
line. Only exert gentle pressure on the saw blade as you do so.
6. To switch off the saw, release the locking button (2) and the ON/OFF switch (1).
Important!
Do not put down the
machine until the saw blade has reached a complete standstill.
7. To change the saw blade (4), turn the ring (a) on the blade holder (6) until the blade (4) lets itself be slipped into
the slot of the blade holder (6). Let go of the ring (a) again and the ring (a) should return to its starting position.
If this fails to happen, try turning the ring (a) by hand into its starting position. Pull on the blade (4) to
check whether it sits tightly in the blade holder (6).
8. IF IN DOUBT PLEASE REFER TO THE USER GUIDE PROVIDED.
4
a
6
1
2
7
3
5
Summary of Contents for BT-CK 18 2B-1.5 Kit
Page 8: ...7 ...
