CORDLESS DRILL
BT-CD 18/2 Li
QUICK START
GUIDE
Easy steps to getting started.
1. Carefully remove all items from the packaging, take care that you have all parts supplied in the
packaging before discarding.
2. To mount the battery pack (4) , push the battery pack (4) onto the equipment until it latches in place.
3. To remove the battery pack , press the pushlock button (5) to remove the battery pack (4) from the equipment.
4. To charge the battery pack (4), follow the instruction on page 1 of the Quick Start Guide.
5. For screwdriving select the torque with the torque selector (1), refer to the User Guide, Section 4.6.1 for more
information.
Important!
The tool must be at a standstill when you set the torque with the setting ring.
6. For drilling, move the torque selector (1) to the last step “Drill“.
7. Use the Forward/Reverse switch (2) to select the direction of rotation.
8. You can adjust the speed. The further you press the On/OFF switch (3), the higher the speed.
9. To change the accessory, open the chuck (7) by turning it counterclockwise. Place the accessory into the tool
and tighten the chuck by turning it clockwise.
Important!
Set the Forward/Reverse switch (2) to its centre
position whenever carrying out any work on the tool.
10. By adjusting the selector switch (6), you can work with a faster or slower turning speed.
Important!
Change the
gear only when the drill is at a standstill.
11.
IF IN DOUBT PLEASE REFER TO THE USER GUIDE PROVIDED.
7
1
6
2
3
5
4
2
Summary of Contents for BT-CK 18 2B-1.5 Kit
Page 8: ...7 ...
