32
After Sales Support
EMAIL: [email protected]
TEL: 1300 922 271
IMPORTANT
The equipment and packaging material are not toys. Do not
let children play with plastic bags, foils or small parts. There
is a danger of swallowing or suffocating!
•
Cordless All Purpose Saw
•
Saw blade (1 x)
•
Original operating instructions
•
Charger (1 x in set included)
•
Battery Pack (2 x in set included)
7.3. PROPER USE
The All purpose saw is designed for sawing wood, non-
ferrous metals and plastic. It should only be used with the
appropriate saw blade.
The equipment is to be used only for its prescribed purpose.
Any other use is deemed to be a case of misuse. The user
/ operator and not the manufacturer will be liable for any
damage or injuries of any kind caused as a result of this.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications. Our
warranty will be voided if the machine is used in commercial,
trade or industrial businesses or for equivalent purposes.
7.4. TECHNICAL DATA
Voltage supply:
18V d.c.
Stroke rate:
0-3000 rpm
Stroke height:
22mm
Cutting depth, wood:
100mm
Weight:
2.0 kg
Sound and vibration
Sound and vibration values were measured in accordance
with EN 60745.
L
pA
sound pressure level
92 dB(A)
K
pA
uncertainty
3 dB
L
WA
sound power level
103 dB(A)
K
WA
uncertainty
3 dB
Wear ear-muffs.
The impact of noise can cause damage to hearing. Total
vibration values (vector sum of three directions) determined
in accordance with EN 60745.
Cutting in Wood
Vibration emission value ah = 18.708 m/s2
K uncertainty = 1.5 m/s2
Additional information for electric power tools
Warning!
The specified vibration value was established in accordance
with a standardized testing method. It may change according
to how the electric equipment is used and may exceed the
specified value in exceptional circumstances.
The specified vibration value can be used to compare the
equipment with other electric power tools.
The specified vibration value can be used for initial
assessment of a harmful effect.
Keep the noise emissions and vibrations to a minimum.
•
Only use appliances which are in perfect working order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever necessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Residual risks
Even if you use this electric power tool in accordance with
instructions, certain residual risks cannot be rules out.
The following hazards may arise in connection with the
equipment’s construction and layout:
Lung damage if no suitable protective dust mask is used.
Damage to hearing if no suitable ear protection is used.
Health damage caused by hand-arm vibrations if the
equipment is used over a prolonged period or is not properly
guided and maintained.
7.5. BEFORE STARTING THE
EQUIPMENT
Charge the battery pack with the charger supplied. An empty
battery pack requires a charging period of approximately 1
hour.
For more details about charging the battery pack please read
the operating instructions of the 1-hour charger.
Always remove the battery pack before making adjustments
to the equipment.
7.5.1 Mounting and removing the battery pack (Fig. 2/Item
3)
Mounting:
Push the battery pack (3) onto the equipment until it latches
in place.
Removing:
Press the pushlock button (7) and pull the battery pack (3) out
of the equipment.
7.5.2 Changing the saw blade (Fig. 3)
Always switch off the saw and remove the battery pack before
working on the machine or changing the saw blade.
Turn the ring (a) on the blade holder (6) as shown in Fig. 3
until the blade (4) lets itself be slipped into the slot of the
blade holder (6).
When you now let go of the ring (a) again, the ring (a) should
