Taurus ALPATEC AC351KT, Manual, Page: 20 / 200

-(c) Temperature and Time adjustment /
Farenheit→Celsius conversion
-(d) Mode selection button
-(e) Timing function button
-(f) Temperature /Timer display window
-(g) Remote control receiver window
-(h) Fahrenheit and Celsius conversion indicator
-(i) Swing mode
-(j) Mode indicators*
(*) Heat mode only available on AC351RVKT
INSTALLATION
- Be sure to remove all packaging material from
inside the appliance.
- Respect the legal provisions concerning safety
distances from other elements such as pipes,
electrical connections, etc.
- Ensure that the appliance is level with respect
to the floor.
- The appliance requires suitable ventilation in
order to work properly. Leave a space of 50cm
between walls or other obstacles. (Fig 1)
- Do not cover or obstruct any of the openings of
the appliance.
- Do not cover or obstruct the sides of the
appliance, and leave a minimum space of 50cm
front other walls, ceiling..
- The plug must be easily accessible so it can be
disconnected in an emergency.
- To achieve the highest efficiency from the
appliance it should be situated in a place where
the atmospheric temperature is between 12 and
32ºC.
- Ensure that the extraction pipe remains in a
horizontal position. (Fig 2)
- Do not add new sections to the extraction tube
provided, as it could cause the appliance to
malfunction.
- The appliance should be used with its base feet
fitted.
- The appliance should be used with its wheels
attached.
ASSEMBLY OF THE EXHAUST HOSE
-Lengthen one head of the hose, and spin the
exhaust hose into exhaust connector (counter-
clockwise).
-Caution: Exhaust pipe is 40 cm~160 cm long
(including adapter).
-The length of exhaust pipe is especially desig-
ned in accordance with the specification of the
air conditioner. Please do not use other exhaust
pipes of different lengths or materials, in such
way failure may be caused.
INSTALLATION OF WINDOW KIT (Fig 3)
- Partially open the window and then fix the win -
dow kit to the window.
-The window kit can be installed on most of
normal and vertical windows and it is adjustable.
- Fix the other end of the heatexhausted hose to
the airoutlet window kit.
INSTRUCTIONS FOR USE
USE:
-Unroll the cable completely before plugging it in.
-Connect the appliance to the mains.
-Press the ON/OFF button, the unit will enter in
cooling mode with low fan speed.
-Press the mode button to select cooling dehumi-
difying, fan mode.
FAN SPEED
-Under the cooling and the fan mode, the speed
goes as follow:
- Lower Fan→Mid Fan→ High Fan.
- In Humidifier mode, the fan only works at low
speed.
TIMER MODE
-In standby mode, press time button to set time
start. Press the up and down button to the time
of start (0~24 hours), and time indicator light is
on.
-In startup mode, press time button to set time
switchoff.
-Press the up and down button to the time of
switchoff (0~24 hours), and time indicator light
is on.
SWING
-Press this button to control the movement of the
louver.
COOLING MODE:
-Press mode to select cooling mode, cooling
mode indicator turns on.
-Press Up or Down to adjust temperature in a
range of 16~30°C (60,8~86°F).
-When the up or down is pressed once, tempera-
ture will go up or down by 1ºC every time.
-Press speed to select high, mid or low fan
speed.
HEAT MODE
Heat mode only available on AC351RVKT
--Press mode (d) to select heat mode, the