duration of the appliance’s useful life and could become
unsafe to use.
- Then dry all parts before its assembly and storage.
Cleaning the appliance:
- In order to avoid the creation of odours and ensure the
unit works properly, it must be cleaned internally once
every two weeks.
- Remove the front panel by loosening the two
attachment pins and lifting the panel upwards, off the
2 upper attachment points. Remove the filter and the
honeycomb filter from the unit.
- Wash the filter in warm water with a mild, soapy
solution; use a soft brush if necessary. Rinse with clean
water and leave to dry.
- Wash the honeycomb filter with clean water and a soft
brush if necessary. Leave to dry.
- Empty the water tank and clean with water, a mild
soapy solution and a soft brush if necessary. Rinse with
clean water and leave to dry.
- At the end of the season, store the cleaned and dried
heater in the original packaging if possible. Store it
upright in a cool, dry and dust-free place.
Anomalies and repair
- Take the appliance to an authorised technical support
service if product is damaged or other problems arise.
Do not attempt to disassemble or repair the appliance
yourself as this may be dangerous.
- If any anomaly is detected, check the following table:
The following information details the features related
to ecodesign:
Maximum fan flow rate (F): 10,39 m³/min
Fan power input(P): 46 W
Service value (SV) (according to IEC 60879): 0,23 (m ³/min)/W
Standby power consumption (PSB): 0,47 W
Fan sound power level (LWA): 56 dB(A)
Maximum air velocity( c ): 2,97 meters/sec
Anomaly
Causes
Solutions
The device does
not work
- No electricity.
- Is the ON/OFF but-
ton pressed in?
- An internal compo-
nent is broken
- Check to ensure the
plug is in the socket
and that the socket
is live
- Press the on/off
button
- Consult the after
sales service
The unit will
not switch off
- ON/OFF button not
pressed in
- An internal
component is broken
- Press the on/off
button.
- Consult the after
sales service
Peculiar sounds
- Something is not
positioned correctly
inside the machine
- A swivel wheel is
broken/missing.
- Ther is an internal
problem
- Remove the
filter and the water
reservoir and install
it correctly
- Consult the after
sales service
The unit humidi-
fies too much or
too little
- Filters are blocked
by dirt
- Technical
breakdown
- Clean the filters.
- Consult the after
sales service
Front panel
Filter
Honeycomb-filter
Back cover
R750-Notice.indb 11
14/12/2015 10:06
