- Secure the blade with the spinner lock nut. The
spinner lock nut must be tightened by turning it in
a counter-clockwise direction. Check that the fan
blades rotates freely by turning with your hand.
- Open the securing clip of the front guard.
- Fit together the rear guard with the front guard
and press the securing clip.
INSTRUCTIONS FOR USE
BEFORE USE:
- Remove the appliance’s protective film.
- Make sure that all products’ packaging has been
removed.
USE:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Turn the appliance on, by using one of the
speed selection buttons.
- Guide the diffuser of the appliance to direct the
flow of air in the desired direction.
- To avoid a fierce start up of the fan, it is advis-
able to start off from the lowest speed position
and, once the fan has been switched on,
progressively increase the speed to the desired
position.
FAN FUNCTION:
- Select the desired ventilation speed.
- 0: Fan off
- 1: Minimal air flow
- 2: Medium air flow
- 3: Maximum air flow
OSCILLATION FUNCTION:
- The oscillation function makes it possible to
direct the flow from the apparatus so that it
automatically alternates over a range of 75º.
- To activate this function, pull the boton (J).
- To deactivate this function, follow the procedure
for switching it on in reverse.
TILTING
- The appliance can be adjusted for a desired tilt
with your hand.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Select the minimum position (MIN) using the
speed control.
- Unplug the appliance from the mains.
- Clean the appliance.
CARRY HANDLE/S:
- This appliance has a handle on the upper part of
the body, which facilitates comfortable transpor-
tation.
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- To disassemble the device, open the securing
clip of the front guard and separate the guards
through the sides. If necessary, you can use a
flat tool to pry in order to disassemble it more
comfortably.
- If the appliance is not in good condition of clean-
liness, its surface may degrade and inexorably
affect the duration of the appliance’s useful life
and could become unsafe to use.
ANOMALIES AND REPAIR
- Take the appliance to an authorised technical
support service if product is damaged or other
problems arise. Do not attempt to disassemble
or repair the appliance yourself as this may be
dangerous.
FOR EU PRODUCT VERSIONS AND/OR IN
CASE THAT IT IS REQUESTED IN YOUR
COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE
PRODUCT
- The materials of which the packaging of this
appliance consists are included in a collection,
classification and recycling system. Should you
wish to dispose of them, use the appropriate
public recycling bins for each type of material.
- The product does not contain concentrations of
substances that could be considered harmful to
the environment.
Summary of Contents for BOREAL 12 ELEGANCE
