Taurus Alpatec AC1215/10, Manual

Page: 10 / 64

Follow “installing the product” instructions
-
After change the new filter, press and hold for 5
seconds to reset.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:.
-
Select the minimum position (MIN) using the
speed control.
-
Turn the appliance off, using the on/off button.
-
Unplug the appliance from the mains.
-
Clean the appliance.
SAFETY THERMAL PROTECTOR:
-
The appliance has a safety device, which pro
-
tects the appliance from overheating.
-
When the appliance switches itself on and
off repeatedly, for reasons other than the
thermostat control, check to ensure that there
are no obstacles that impede correct air entry
or expulsion.
-
If the appliance turns itself off and does not
switch itself on again, disconnect it from the
mains supply, and wait for approximately 15
minutes before reconnecting. If the machine
does not start again seek authorised technical
assistance.
CLEANING
-
Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
-
Clean the electrical equipment and the mains
connection with a damp cloth and dry. DO
NOT IMMERSE IN WATER OR ANY OTHER
LIQUID.
-
Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
-
Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
-
Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
-
Never submerge the appliance in water or any
other liquid or place it under running water.
-
Do not wash the filter.
-
Do not use a vacuum cleaner to clean the filter.
-
Sterilize the filter under sunlight regulary.
-
If the appliance is not in good condition of
cleanliness, its surface may degrade and
inexorably affect the duration of the appliance’s
useful life and could become unsafe to use.
SUPPLIES
-
Supplies can be acquired from distributors and
authorised establishments (such as filters, etc.)
for your appliance model.
-
Always use original supplies, designed specifi
-
cally for your appliance model.
-
Only the following type of supplies must be
used with the appliance.
-
Filters
SPECIFICATIONS:
-
Protection degree: IPXO
-
Applied part type: BF
-
Weight: 5,9 kgs
-
Acoustic pressure level < 50dB(A)
-
Operating temperature: 0°C-35 °C
-
Storage temperature: -15°C-45°C
-
Continuous operation with short-time loading
-
Not suitable for use in presence of flammable
anaesthetic mixture with air or with Oxygen or
nitrous oxide
NB: These specifications are subject to change
without notice of purpose of improvement.
-
NB: By virtue of the conditions of fabrication
of this product, the maximum absorbed power
can differ from that specified.
-
NB: By virtue of the conditions of fabrication
of this product, the maximum used power can
differ from that specified.