[Technical Documentation]
on the other hand to the fact that we may possibly have to stop the machine
in order to clean the calendar roller of plastic fragments that may have
adhered to it.
Temperature is controlled by activating the temperature regulator located on
the control panel of the principal module.
This sensor receives temperature from a temperature sensor (Type J
temperature probe), which measures the actual temperature in the calendar
and forms a part of a PID regulation system in a closed loop, implemented in
the temperature regulator.
The display shows the temperature of the calendar. In order to modify the
working temperature (the temperature we require) only press the ascending
or descending arrow keys in order to increase or decrease the same.
Temperature regulator
SEPARATING UNIT
The separating unit is based on a pulling scissor-movement roll. Previous to
start working, we must place the micro perforating wheel over the edge of the
film as shown in picture below
You must place the sheet over the anti-curling roll and between the green and
black roll, and then activate the Cutting wheels’ selector
To start separating, you must push the Separating roll button.
