tau LAMP Series, Installation Manual

Page: 5 / 8

5 LAMP SERIES
DEUTSCH
1. BLlNKLAMPE
(Abb. 3)
Technlsche Merkmale
LAMP1 LAMP2 LAMP3* LAMP3A* LAMPCON3
Einspeisung 12V 230V 230V 230V 230V
Entnahme 2,1A 0,1A 0,1A 0,1A 0,1A
Versorgung der Lampe 25W 25W 25W 25W 25W
Schutzart
(mit montierter Antenne)
IP44
LAMP4* LAMP4A* LAMPCON4 LAMP5 T-LED
Einspeisung 12V 12V 12-24V 24V 12-24V DC
Entnahme 2A 2A 0,8-0,4A 1A 140 mA
Versorgungder Lampe /
Lichtstrom Led
25W 25W 15-10W 25W
3,3 W (24V DC) /
165 lumen - 24V DC
Schutzart
(mit montierter Antenne)
IP44
(*) LAMP3 und LAMP4 sind ausschließlich für den Anschluss an Steuerkarten mit eingebautem Blinkkreislauf
entstanten und verf9gen über keinen eigenen elektrischen Kreislauf.
Anschlüsse (Abb. 2)
LAMP4* LAMP4A* LAMPCON4 LAMP5 T-LED
Power 12V 12V 12-24V 24V 12-24V DC
Absorption 2A 2A 0,8-0,4A 1A 140 mA
Lamp power /
Led light output
25W 25W 15-10W 25W
3,3 W (24V DC) /
165 lumen - 24V DC
Protection level
(With aerial assembled)
IP44
(*) LAMP3 and LAMP4 are exclusively designed for use with control cards featuring a built-in flashing light
circuit as they are not fitted with an electrical circuit.
Connections (fig. 2)
2. AERIAL
(fig. 1)
ANTQ/ANTQ1 ANTD/ANTD1
Frequecy band 26,995MHz ÷ 40,665MHz 433,92MHz
LAMP3A and LAMP4A flashing lights have a 433,92 Mhz built-in aerial.
3. ASSEMBLlNG THE FLASHING LlGHT/AERIAL UNIT
(fig. 5)
4. FIXING THE FLASHING LlGHT
Choose a place:
• near the gate or automated door;
• free from visual obstacles (also to facilitate radio reception).
1_ On a flat base (fig. 6 - fig. 7)
The bottom stand is not needed.
Use expansion bolts (masonry pillar) or self-threading screws (metal pillar).
2_ By the side or at the front (fig. 8)
Install the flashing light on the bottom stand you fixed previously.
Note: use a soft, damp cloth to clean the lamp. Do not use chemical cleaning agents.
5. FIXING JUST THE AERIAL
(fig.9)
Use expansion bolts (masonry pillar) or self-threading screws (metal pillar).