TATUNG Wireless Thin Client (TX-2000) User Guide
System Operation Problems
Action
The touch screen is out of
calibration.
Run recalibration from Control Panel/Stylus.
TWN-5213 CU locks up or runs
slowly.
Close applications that are not in use.
Try to reset the system by pressing reset button.
The touch screen is damaged.
Contact an authorized TATUNG representative.
TWN-5213 CU runs out of storage
space
Reallocate TWN-5213 CU storage and program memory management by
doing a cold boot (memory initialization).
To turn off the sound in TWN-
5213 CU
Disable the volume and notifications functions.
Network Connection Problem
Action
Network connection problems
Make sure that the access point is firmly seated and connected to the
proper network jack while it is functioning in the network infrastructure
mode.
Make sure that you have provided the required server information.
Ensure that WEP is enabled and the keys are accepted for both the client
and host devices while exercising the ad hoc mode (peer-to-peer
connection).
You can view the system’s wireless status by checking the Wireless
Signal LED
Summary of Contents for TWN-5213 CU
Page 1: ...2005 6 27 page1 TATUNG Wireless Thin Client TWN 5213 CU ...
Page 14: ...TATUNG Wireless Thin Client TX 2000 User Guide ...
Page 19: ...TATUNG Wireless Thin Client TX 2000 User Guide ...
Page 25: ...TATUNG Wireless Thin Client TX 2000 User Guide 3 Screens 1 through 7 of device calibration ...
