TATUNG Wireless Thin Client (TX-2000) User Guide
8. Troubleshooting...............................................................
When you experience operational problems, check the following guide for system troubleshooting. If problems
persist, please contact your service provider for technical support.
Battery Operation Problems
Action
Main battery is low.
Replace or recharge the battery as soon as possible.
Plug in the AC-DC adapter in and continue using TWN-5213 CU
When the main battery is discharging, the RAM data will be kept since the
memory is powered by the backup battery. If the backup battery power is
low, the data may be totally lost, so please save your data regularly.
The battery appears to be
damaged or has reached the
end of its service life.
Purchase a new battery.
TWN-5213 CU powers off
automatically.
Use the stylus to tap on the screen to check whether the display activates
by your awakening.
Check to see if the system is in suspend mode.
Check to see if the battery power is too low or completely drained.
Replace a charged battery or plug in the AC-DC adapter to charge the
battery.
TWN-5213 CU cannot be turned
on when not connected to AC
power.
Make sure the battery switch is in the lock position.
The battery power may be too low to run TWN-5213 CU. Try connect to
AC power again.
Display Related Problems
Action
Screen appears dark
Excessive exposure to direct sunlight may cause TWN-5213 CU screen to
temporarily darken. This is a natural phenomenon for LCD screens. It will
not be permanent.
Screen appears blank
Adjust the LCD display brightness by using the brightness control or
restart TWN-5213 CU.
Summary of Contents for TWN-5213 CU
Page 1: ...2005 6 27 page1 TATUNG Wireless Thin Client TWN 5213 CU ...
Page 14: ...TATUNG Wireless Thin Client TX 2000 User Guide ...
Page 19: ...TATUNG Wireless Thin Client TX 2000 User Guide ...
Page 25: ...TATUNG Wireless Thin Client TX 2000 User Guide 3 Screens 1 through 7 of device calibration ...