Tatung TME 17, User Manual, Page: 14 / 14

12
CAUTION : Don't let your machine display the same picture for a long time, please set up a screen protection
procedure. If a high contrast picture remains for along time, this picture will bring a 'leave shadow' in screen.
Usually the 'leave shadow' will disappear gradually when you turn off the machine power. However, this trouble
can't be repaired , Which isn't in range of warranty.
Electrical release at turning off. It is normal. Noise Signals at turning off.
Computer display image
excursion, not full screen,
over screen.
1.Adjustment is incorrect.
2.Display mode is incorrect.
1.Use auto-adjustment function.
2.Enter
to adjust horizontal or
vertical position.
3.Use recommended mode.
"GEOMETRIC"
Exterior influence, for example
lightning, static electricity and so
on, which are possibly to disturb
the normal operation of this
machine
Can not operate this
machine .
Press " " button to turn of f electrical source, then
press " " button to turn on the monitor again after
1-2 minutes.
Computer display faintly.
1.Adjustment is incorrect.
2.Display mode is incorrect.
1.Use auto-adjustment function.
2.Use commend mode
Simple Troubleshooting
Symptom Factor Solution
No image. No sound.
Power plug is loose, power
cord don't connect well.
1.Check power cord whether or not connect well.
2.Check if the
button is on. " "
Computer no display, and
prompt no signal input, red
indicator LED twinkling.
Signal cable is loose or fall off.
Check signal cable whether or not loose, fall off,
reconnect well again.
No color. Color saturation is too low.
Enter "PICTURE" to add up color saturation.