Wall Mounting with VESA Standard
Note
:
Installation method is different because of Hanging arm hardware's structure.
Must install the wall pendant on firm wall surface, please do not install this machine on ceiling or vehicles.
1.
AUTO
:
.
2. : Decreases the volume.
adjust analog value or state
3. : Increases the volume.
adjust analog value or state
4. : Activates and exits the On Screen Display. When
you are satisfied with the setting, press " " key to
return to the previous menu or exit. Also, on the
Source Menu, press " " key to enter the selected
video input.
5. : Turns on/off the monitor.
Note:
There are some apparent differences between modes, please according to practicality.
1. Loose the two bolts with a screwdriver. Then the base and the knighthead can be
taken off. In order to prevent the two bolts from loose, it is better to assemble the
bolts into the axis of rotation on the rear cover of the monitor.
2. Clean up the signal cable, power cord, audio cable.
3. Fix the wall-mounting parts (optional parts according with VESA standard) on the
rear cover to mount the monitor on the wall.
Front
Press this key to display signal source menu. In OSD menu, press this key to enter the adjustment sortmenu,
and select the items you want to adjust
In OSD menu, press this
key to select sort menu,
in sort menu.
In OSD menu, press this
key to select sort menu,
in sort menu.
Panel Control Keys
1
2
3
4
5
7
Summary of Contents for TME 17
Page 1: ...L C D MONITOR T M E 1 7 ...