9
PICTURE
Select to display PICTURE submenu. Press "
AUTO
" key to enter into
the submenu and select the item which you need to adjust. Press "
+
/
-
" key
to adjust analog value or state (see below table).
Special Attention
The value adjusted by user, such as Contrast, Brightness, Saturation,
Hue, and Sharpness will be saved automatically by the machine as
personal mode.
Picture Mode
Contrast
Brightness
Saturation
Hue
Sharpness
Aspect Ratio
Color Temp
Noise Reduction
Select picture mode
Adjust the contrast of whole picture
Adjust brightness and blackness of
whole picture
Adjust the saturation of whole picture
Adjust the hue of whole picture
Adjust the sharpness of whole picture
Select picture scale
Select color temperature mode of the
picture
Select model of 3D NR
"Standard", "Soft", "User", "Bright" four modes.
Increasing analog value increases Contrast;
Decreasing analog value decreases Contrast(0-100).
Increasing analog value increases brightness;
Decreasing analog value decreases brightness(0-100).
Increasing analog value increases color;
Decreasing analog value decreases color (0-100).
Increasing analog value increases green;
Decreasing analog value increases purple(0-100).
Increasing analog value increases definition;
Decreasing analog value decreases definition (0-100).
"Full", "4:3", "Subtitle", "Film" four modes
There are three Color Temperature modes: "Standard",
"Warm", "Cool ".
"Middle", "High", "Off", "Low".
Option
Function
Description
Adjust
Select
Menu:Exit
Full
Standard
48
48
50
55
50
Picture Mode
Contrast
Brightness
Saturation
Sharpness
Aspect Ratio
Color Temp.
Noise Reduction
Hue
Soft
Off
Summary of Contents for TME 17
Page 1: ...L C D MONITOR T M E 1 7 ...