User Manual (English version)_V2.0
10
Illustration
Instructions
Grind the fins by fine sandpaper and then use rag with
cleaning naphtha to scrub the fins.
Take an appropriate amount of epoxy putty and knead
it about five minutes to make it completely mixed and
soft. Then stuff the epoxy putty into the position
between the fins.
Press the fixing seat into the epoxy putty and ram the
epoxy putty around the fixing seat.
Fix the supporting plate and adjust by using level
gage.
Wait for 24 hours for the epoxy putty to become totally
solid, then stick thermal pad on hexagon socket bolt
and fix the sensor onto the supporting plate.
(3) Directly fix the sensor onto the motor surface
：
NOTE
If the motor frame has a lateral plane without fins, the user can just tap
one M6 hole
(installed with supporting plate)
or
two M4 holes (hole distance is
88mm
(
3.47inch
)
)
and directly fix the sensor onto the lateral plane.
Drill one M6 hole
Drill two M4 holes
<hole distance is 88mm (3.47inch)>
Installed with supporting plate
Sensor fixed onto the motor directly
