TATU PST DUO FLEX Operator'S Manual Download Page 132

Page: 132 / 150

130

Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.

PST DUO FLEX / PST DUO FLEX SUPREMA

Optional

Automatic retrieving of the rod

Scarifier spindle with 3 holes.

Different working angle that

provides less soil movimentation.

Standard scarifier spindle.

Indicated for every type of soil.
Shank tips: Duromark and high

impact.

Shank with fuse pin

Indicated for rocky soils.
If any friction occurs, the

pin will be activated.

The automatic retrieving rod (A)

is used over rocky areas.

The bolt (B) adjusts the pressure

on the rod spring.

To assemble the rod (A), fasten

it on the arm of the fertilizer row (C)

using bolts (D), flat washers and nuts.

Summary of Contents for PST DUO FLEX























































































































































Search results

Summary of Contents for PST DUO FLEX

Reviews:

Related manuals for PST DUO FLEX

Brands by name

Popular brands

TATU PST DUO FLEX, Operator'S Manual

Search results

Summary of Contents for PST DUO FLEX

Reviews:

Related manuals for PST DUO FLEX

Brands by name

Popular brands