37
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
TCA 13500
Lubrication
Maintenance
Lubricate the points shown above and all grease fittings as well.
ATTENTION
In order to extend the lifetime of your chaser bin and avoid interruptions during working,
lubricate it properly, as indicated below.
Every 24 operating hours, lubricate the articulations through the grease fittings in the
following way:
• Be sure about the lubricant quality, with relation to its efficiency and purity, avoiding
the use of products contaminated by water, earth and others.
• Remove the remainder old grease around the articulations.
• Clean up the grease fittings with a cloth before applying a new grease and replace
the defective ones.
• Apply a sufficient amount of new grease.
• Use medium consistency grease.
• CARDANS: Grease the universal joints daily and verify if the tube and axle are
protected with grease.
